Step 1 - Place Windows 7 DVD in your dvd-rom drive and start
your PC. Windows 7 will start to boot up and you will get the following
progress bar.
Klik Di Sini Untuk Zoom Gambar
Step 2 - The next screen allows you to setup your language, time and
currency format, keyboard or input method. Choose your required settings
and click next to continue.
Klik Di Sini Untuk Zoom Gambar
Step 3 - The next screen allows you to install or repair Windows 7.
Since we are doing a clean install we will click on "install now".
Klik Di Sini Untuk Zoom Gambar
Step 4 - Read the license terms and tick I accept license terms. Then click next to continue.
Klik Di Sini Untuk Zoom Gambar
Step 5 - You will now be presented with two options. Upgrade or Custom
(Advanced). Since we are doing a clean install we will select Custom
(Advanced).
Klik Di Sini Untuk Zoom Gambar
Step 6 - Choose where you would like to install Windows 7. If you have
one hard drive you will get a similar option to the image below. You can
click next to continue. If you have more that one drive or partition
then you need to select the appropriate drive and click next. If you
need to format or partition a drive then click Drive options (advance)
before clicking next.
Klik Di Sini Untuk Zoom Gambar
Step 7 - Windows 7 starts the installation process and starts copying
all the necessary files to your hard drive as shown on the image below.
Klik Di Sini Untuk Zoom Gambar
Step 8 - It will go through various stages of the setup and will reboot your system few times.
Klik Di Sini Untuk Zoom Gambar
Step 9 - When your PC reboots it attempts to boot from DVD as its the
first boot device. Do not press any key during the boot prompt so
Windows 7 will continue with the installation by booting from the hard
drive.
Klik Di Sini Untuk Zoom Gambar
Step 10 - After the reboot your computer will be prepared for first use.
Klik Di Sini Untuk Zoom Gambar
Step 11 - At this stage you need to choose a user name and computer
name. Click next to continue. The user account you create here is the
Administrator account which is the main account for your Windows 7 that
has all the privileges.
Klik Di Sini Untuk Zoom Gambar
Step 12 - Choose your password and password hint just incase you forget your password and need to jog your memory.
Klik Di Sini Untuk Zoom Gambar
Step 13 - You can now type the product key that came with Windows 7 and
click next. If you do not enter the product key you can still proceed to
the next stage. However Windows 7 will run in trial mode for 30 days.
You must therefore activate Windows within 30 days otherwise you can not
access your computer after 30 days.
Klik Di Sini Untuk Zoom Gambar
Step 14 - Help protect your computer and improve Windows automatically. Choose Use recommended settings.
Klik Di Sini Untuk Zoom Gambar
Step 15 - Review your time and date settings. Select your time zone, correct the date and time and click next to continue.
Klik Di Sini Untuk Zoom Gambar
Step 16 - Select your computer's current location. If you are a home
user then choose Home network otherwise select the appropriate option.
Klik Di Sini Untuk Zoom Gambar
Step 17 - Windows will now finalize the settings for your computer and restart.
Klik Di Sini Untuk Zoom Gambar
Step 18 - After the final restart Windows 7 will start to boot up.
Klik Di Sini Untuk Zoom Gambar
Step 19 - Finally you have the logon screen. Just type your password and
press enter or click on the arrow to logon to Windows 7 for the first
time.
Klik Di Sini Untuk Zoom Gambar
Step 20 - After you have logged on to Windows 7 for the first time, you
will see similar desktop to the image below. At this point you can start
using your computer. However it may not be fully configured. You need
to make sure that all the hardware is detected correctly and the
necessary device drivers are installed. This can be done from the device
manager.
Klik Di Sini Untuk Zoom Gambar
Step 21 - To go to device manager click - Start Menu -> Control Panel
-> System and Security -> System -> Device Manager. You will
see all your hardware listed as shown on the image below. You need to
check if you have any yellow exclamation marks next to the name of the
devices, similar to "Multimedia Audio Controller" on the image below.
This indicates that the driver has not been installed for this device.
At this stage you can install the driver for this device. To do so,
Right Mouse click on Multimedia Audio Controller -> Update Driver
Software...
Klik Di Sini Untuk Zoom Gambar
Step 22 - You can choose to "Search automatically for updated driver
software" or "Browse my computer for driver software". If you have the
driver CD or if the driver is on a USB drive then choose "browse my
computer for driver software". Window 7 will search and install the
driver from the CD or you can locate the driver manually.
Once you have removed all the yellow exclamation marks from the device
manager your Windows 7 configuration would be fully complete.
Klik Di Sini Untuk Zoom Gambar
Step 23 - Finally check if you have successfully activated Windows 7.
Click Start Menu -> Control Panel -> System and Security ->
System. You will get a window similar to the image below. Towards the
bottom you will see Windows is activated followed by your product ID.
This shows that your copy of Windows 7 is fully activated.
Klik Di Sini Untuk Zoom Gambar
No comments:
Post a Comment